- Parts release cleanly
- Fast drying
- Colourless & odourless*
- Plastic, rubber & metal moulds
- 550 ml can
- Prepaid · free delivery
Thin coat, clean release
The whole trick is a light, even film.
1. Shake & clean
Shake the can well. Make sure the mould surface is clean.
2. Spray thin
Spray a thin, even coat over the cavity. Heavy wet coats can mark parts.
3. Mould & release
Let it dry, then mould. Re-apply when parts start to stick again.
Drag to compare
Stop prying parts out of the mould
A stuck part means a screwdriver in the cavity, a torn part in the scrap bin and scratches on a polished mould.
A thin film of release spray lets the part lift out whole and keeps the machine running.
Where it is used
Plastic, rubber and metal moulds, machinery and workshops.
Release spray vs burnt oil vs grease
Why a thin spray film beats what most small units use.
| Feature | Recommended
BuildingShop release spray
|
Burnt oil / diesel |
Hand-smeared grease |
|---|---|---|---|
| Thin, even film | ✓ | ✕ | ✕ |
| Fast drying | ✓ | ✕ | ✕ |
| Marks on finished parts | Colourless* | Dark stains | Greasy patches |
| Smoke and smell on a hot mould | Odourless* | Yes | Some |
| Clean, quick to apply | ✓ | ✕ | ✕ |
Mould release: common mistakes
What we hear from moulding shops.
MythMore spray means better release.
FactA thin, even coat works best. Heavy coats can leave marks on parts.
MythBurnt oil does the same job for free.
FactOil smokes on hot moulds, stains parts and builds up dirt in the cavity.
MythYou have to spray before every single shot.
FactRe-apply when parts start to stick again.
MythAny release spray can replace shuttering oil on concrete formwork.
FactThis spray is sold for plastic, rubber and metal moulds and workshop use. For concrete shuttering use a shuttering oil made for formwork.
Product details
Parts that come out clean, every shot
When a moulded part sticks, someone has to pry it out with a screwdriver. The part tears, the polished mould gets scratched and the machine stands idle. Rubbing burnt oil, diesel or grease into the mould only swaps one problem for another – smoke, stains and greasy parts.
BuildingShop mould release spray puts a thin, even, fast-drying anti-stick film on the mould so parts release cleanly and production keeps moving.
Why workshops use it
- Prevents sticking – cleaner, smoother release for plastic, rubber and metal moulds.
- Fast drying – less downtime between shots.
- Colourless and odourless (as printed on the can).
- Heavy-duty 550 ml can – fewer replacements on long runs.
- Multi-purpose – also for machinery and workshop maintenance.
How to use
- Shake the can well.
- Spray a thin, even coat on the clean mould surface.
- Let it dry, then mould. Re-apply when parts start to stick again.
Safety: pressurised aerosol. Keep away from flames and heat, do not puncture or burn the can, use in a ventilated area and keep out of reach of children.
| Model | MRS-550 |
|---|---|
| Type | Mould release aerosol spray |
| Volume | 550 ml |
| Drying | Fast drying |
| Finish | Colourless, odourless (as printed on can) |
| Used on | Plastic, rubber and metal moulds; machinery; workshops |
Which moulds can I use it on?
Plastic, rubber and metal moulds, as well as machinery and general workshop use.
How do I apply it?
Shake well and spray a thin, even coat on the clean mould. Let it dry before moulding. Re-apply when parts begin to stick.
Will it leave marks on my parts?
It is fast drying and colourless. Apply a thin coat – heavy, wet coats can leave marks on any part.
Is it a replacement for shuttering oil on concrete formwork?
This spray is sold for plastic, rubber and metal moulds and workshop use. For large concrete shuttering, use a shuttering oil made for formwork.
How much is in one can?
550 ml.
Is it safe to use near heat?
It is a pressurised aerosol. Keep it away from open flames and heat, never puncture or burn the can, and use it in a ventilated area.
How do I pay? Is cash on delivery available?
Prepaid only – UPI, debit/credit cards and net banking. Cash on delivery is not available.
Free delivery across India. Most orders reach you in 3–7 working days, depending on your pincode.
Payment: prepaid only – UPI, debit/credit cards and net banking. Cash on delivery is not available.
Bulk or GST invoice? Message us on WhatsApp before ordering.
For the workshop
Heat-resistant gloves, sealant and a rubber mallet.
Running a moulding unit? Get factory pricing
Moulding units and workshops get special rates on carton orders.
- Volume pricing on carton quantities
- GST invoice for your business
- Regular dispatch for running lines

Customers also viewed
Mould Release Spray 550 ml – Fast-Drying Anti-Stick Spray for Plastic, Rubber & Metal Moulds
Sale price
Rs. 279
Regular price
Rs. 639









