Drag to compare
The jet spray nobody wants to touch
Cheap chrome-plated faucets pit and rust, thin hoses split near the nut, and the holder snaps off – so the spray ends up hanging by its hose and staining the tiles.
A white ABS jet spray has no metal to rust, a stainless steel hose doesn't burst, and a chrome wall hook keeps it off the floor.
What needs fixing?
Tap your problem – we show the right part.
New jet spray – valve right next to the toilet
Health faucet set · 1 m hose
Enough hose when the angle valve is within about 70 cm of where you hold it.
Shop this →
New jet spray – valve behind or away from the toilet
Health faucet set · 1.5 m hose
Extra reach so the hose isn't pulled tight across the toilet.
Shop this →
Old hose burst or rusted
Stainless steel hose · 1 m
Swap just the hose – fits ½-inch faucets and angle valves.
Shop this →
Holder broke, spray on the floor
Wall hook · Pack of 2
One for each bathroom; holds jet sprays and hand showers.
Shop this →
Fit it yourself in 10 minutes
No plumber, no special tools.
1. Tape the valve
Close the angle valve and wrap 6–8 turns of thread tape on its outlet.
2. Connect the hose
Tighten the hose nut by hand, then a quarter turn more. Washers go inside both nuts.
3. Fix the hook
Screw the hook to the wall at hand height beside the toilet.
4. Test
Fit the spray, open the valve and check every joint for drips.
Bathroom fitting myths
Things buyers tell us before they order.
MythChrome means better quality.
FactThin chrome plating on cheap metal pits and rusts in hard water. ABS has nothing to rust.
MythI need a plumber to change a jet spray.
FactThread tape, a hand-tight nut and two screws – about 10 minutes.
MythAny hose won't fit my faucet.
FactAlmost all Indian health faucets, hand showers and angle valves use ½-inch threads – our hoses and sets fit them.
MythA longer hose is always better.
FactToo long and it drags on the wet floor. Measure from the valve to hand height and pick 1 m or 1.5 m.
MythThread tape is optional.
FactA few turns of tape on the valve stops the slow drip that stains tiles.
Our set vs the usual fixes
What most bathrooms end up with.
| Feature | Recommended
BuildingShop set
|
Cheap PVC hose & chrome spray |
Bucket & mug |
|---|---|---|---|
| Rusts in hard water | ✕ | Often | – |
| Hose bursts near the nut | Steel hose: no | Common | – |
| Wet floor after use | ✕ | When it leaks | ✓ |
| Spray stays off the floor | Chrome hook | Until the holder snaps | – |
| Fits ½-inch angle valve | ✓ | ✓ | – |
Product details
A jet spray that never rusts. Cheap chrome-plated faucets can pit, rust and leak in hard water. This one is made of white ABS – there is no metal to rust, the nozzle stays clean and the thumb-press gives a steady, gentle spray.
What you get
- White ABS jet spray – rust-proof body and anti-rust nozzle
- Thumb press – control the flow with one thumb
- 1 m flexible hose – best for small bathrooms where the angle valve is right next to the toilet
- Leakproof connector – with washer, fits standard ½-inch angle valves
- Wall holder – keeps the spray off the floor
How to fit it (10 minutes)
- Close the angle valve and wrap 6–8 turns of thread tape on its outlet.
- Tighten the hose nut by hand onto the angle valve, then a quarter turn more.
- Screw the holder to the wall at hand height beside the toilet.
- Fit the spray to the hose, open the valve and check for drips.
Want a stronger hose? Swap in the BUILDINGSHOP stainless steel hose.
| Brand | BUILDINGSHOP |
|---|---|
| Material | ABS plastic |
| Colour | White |
| Hose length | 1 m |
| Hose type | Flexible PVC |
| Connection | Standard ½-inch (15 mm) angle valve |
| In the box | Jet spray, hose, wall holder |
| Use | Indian and western toilets |
1 m or 1.5 m – which hose length do I need?
Measure from the angle valve to where you will hold the spray. Up to about 70 cm, the 1 m hose is enough. If the valve is behind or away from the toilet, choose 1.5 m.
Will it fit my bathroom tap point?
Yes, it connects to a standard ½-inch (15 mm) angle valve – the common bathroom fitting in India.
Will it rust?
No. The body is ABS plastic, not chrome-plated metal, so there is nothing to rust or peel.
Do I need a plumber?
No. Wrap thread tape, tighten the hose nut by hand, and screw the holder to the wall. It takes about 10 minutes.
How do I pay? Is cash on delivery available?
Orders are prepaid only – UPI, debit/credit cards and net banking. Cash on delivery is not available. Prepaid orders ship faster and you still get free delivery across India.
Free delivery across India. Most orders reach you in 3–7 working days, depending on your pincode.
Payment: prepaid only – UPI, debit/credit cards and net banking. Cash on delivery is not available.
Bulk or GST invoice? Message us on WhatsApp before ordering.
Complete the bathroom fix
Spray, hose, hook and the pipe for your basin or flush tank.
Fitting out a building or hotel?
Builders, hotels and rental owners get special rates on full bathroom sets.
- Bulk pricing on 10+ sets
- GST invoice for your business
- Mix sprays, hoses, hooks and pipes

Customers also viewed
BUILDINGSHOP Health Faucet Jet Spray for Toilet – White ABS, Leakproof, with 1 Metre Hose & Wall Holder
Sale price
Rs. 279
Regular price
Rs. 639







